Henan Donglian Cable Co., Ltd.
Solar Cables
Cables

Solar Cables

Reference product range for solar cables, organized for technical comparison and project enquiries.

Solar Cables

TOPSOLAR® PV H1Z2Z2-K

Reference specification for H1Z2Z2-K in the Solar Cables range. Confirm final construction, standards and sizing for the actual project before ordering.

Open Air, Buried, In conduit

Category Solar Cables
Brand TOPSOLAR® (reference)
Voltage 1.5 (1.8) kV DC / 1.0/1.0 kV AC
Conductor Electrolytic annealed tinned copper, class 5 (flexible) according to IEC 60228 and EN 60228
Standards EN 50618, IEC 62930, UTE C 32-502
Applications Open Air, Buried, In conduit
Updated 2026-07-28

Technical overview

Key product information for comparison, engineering review and quotation preparation.

Product description

Reference specification for H1Z2Z2-K in the Solar Cables range. Confirm final construction, standards and sizing for the actual project before ordering.

MaterialTinned copper, class 5 (flexible)
ConductorElectrolytic annealed tinned copper, class 5 (flexible) according to IEC 60228 and EN 60228
InsulationHalogen free cross-linked rubber according to table B1 in Annex B of EN 50618 and IEC 62930
Outer SheathHalogen free cross-linked flexible rubber according to table B1 in Annex B of EN 50618 and IEC 62930
Rated Voltage1.5 (1.8) kV DC / 1.0/1.0 kV AC
Maximum Conductor Temperature90 (120 during 20,000 h) °C
Maximum Short-Circuit Temperature250 (max. 5 s) °C
Minimum Service Temperature-40 (fixed and protected installations) °C
Flame Non-PropagationFlame non-propagation according to EN 60332-1-2 / IEC 60332-1-2
Fire Non-PropagationFire non-propagation according to EN 50399
CPR ClassificationCca-s1b, d2, a1 according to EN 50575
Halogen FreeLow Smoke Halogen Free according to EN 60754-1 / IEC 60754-1
Low Corrosive Gases EmissionLow corrosive gases emission according to EN 60754-2 / IEC 60754-2
Low Smoke EmissionLow smoke emission according to EN 61034 / IEC 61034
Light Transmittance> 60%
Minimum Bending Radius4x cable diameter (cable diameter ≤ 8 mm), 5x cable diameter (8 12 mm)
Impact ResistanceAG2 Medium severity
Chemical & Oil ResistanceExcellent
UV ResistanceUV Resistant according to EN 50618 and IEC 62930
Water ResistanceAD7+ Immersion, AD8 Submersion
Installation ConditionsOpen Air, Buried, In conduit
Standards (According To)EN 50618, IEC 62930, UTE C 32-502
Standards and ApprovalsTÜV Rheinland, RETIE, AENOR, RoHS, CE
Typical ApplicationsSolar PV installations, Solar farms, Rooftop solar, Floating solar plants

Reference source: Top Cable public product page. This local entry is a technical reference and does not imply manufacturing ownership of the referenced trademark.

Key characteristics

Electrical performance 1.5 (1.8) kV DC / 1.0/1.0 kV AC
Conductor Electrolytic annealed tinned copper, class 5 (flexible) according to IEC 60228 and EN 60228
Standards EN 50618, IEC 62930, UTE C 32-502
Applications Open Air, Buried, In conduit
Visits 1

Typical applications

Use-case guidance to understand where this product fits best.

TOPSOLAR® PV H1Z2Z2-K

Open Air

Reference application: Open Air.

TOPSOLAR® PV H1Z2Z2-K

Buried

Reference application: Buried.

TOPSOLAR® PV H1Z2Z2-K

In conduit

Reference application: In conduit.

Why choose this cable

Service and manufacturing advantages that support the product decision.

Quality

Quality

Stable manufacturing and dependable delivery quality.

Engineering

Engineering

Practical cable solutions for project-specific use cases.

Value

Value

Balanced cost and product performance for long-term projects.

Support

Support

Fast response before delivery and after project deployment.

Product FAQs

Use these quick answers to help technical and commercial teams align faster.

Confirm voltage, conductor construction, installation conditions, required standards and cable sizing for the specific project.

Questions? We help you select the right cable.
Technical support

Questions? We help you select the right cable.

Request a quote

Related products