Henan Donglian Cable Co., Ltd.
Medium Voltage Cables
Cables

Medium Voltage Cables

Reference product range for medium voltage cables, organized for technical comparison and project enquiries.

Medium Voltage Cables

X-VOLT® RHVhMVh 3x Cu +H1

Reference specification for RHVhMVh 3x Cu +H1 in the Medium Voltage Cables range. Confirm final construction, standards and sizing for the actual project before ordering.

Open Air. In conduit. Underground.

Category Medium Voltage Cables
Brand X-VOLT® (reference)
Voltage 3.6/6 to 18/30 kV
Conductor Electrolytic annealed copper, class 2 according to EN 60228 and IEC 60228
Standards IEC 60502-2, Repsol ED-P-10.01-01
Applications Open Air. In conduit. Underground.
Updated 2026-07-28

Technical overview

Key product information for comparison, engineering review and quotation preparation.

Product description

Reference specification for RHVhMVh 3x Cu +H1 in the Medium Voltage Cables range. Confirm final construction, standards and sizing for the actual project before ordering.

MaterialCopper, class 2
ConductorElectrolytic annealed copper, class 2 according to EN 60228 and IEC 60228
Conductor ScreenThermosetting semiconductor
InsulationXLPE, triple layer extrusion
Insulation ScreenStrippable thermosetting semiconductor
Metallic ScreenCopper tape H1 design (2×0.1mm helicoidally overlapped)
Separation SheathPVC, hydrocarbon resistant
ArmourGalvanized steel wire, helicoidally wrapped
Outer SheathPVC, hydrocarbon resistant. Red colour
Rated Voltage3.6/6 to 18/30 kV
Maximum Conductor Temperature90 °C
Maximum Short-Circuit Temperature250 (max. 5 s) °C
Minimum Service Temperature-15 °C
Flame Non-PropagationFlame non-propagation according to EN 60332-1 / IEC 60332-1
Fire Non-PropagationFire non-propagation according to EN 60332-3 / IEC 60332-3
Reduced HalogensReduced halogens, Chlorine < 15%
Minimum Bending Radius (Installed)15x cable diameter
Minimum Bending Radius (During Installation)20x cable diameter
Abrasion ResistanceYes
Chemical & Oil ResistanceExcellent
Hydrocarbon ResistanceHydrocarbon resistant according to UIC 895 OR
Installation ConditionsOpen Air. In conduit. Underground.
Standards (According To)IEC 60502-2, Repsol ED-P-10.01-01
Standards and ApprovalsCE, RoHS
Typical ApplicationsDistribution networks, Industrial facilities, Street lighting

Reference source: Top Cable public product page. This local entry is a technical reference and does not imply manufacturing ownership of the referenced trademark.

Key characteristics

Electrical performance 3.6/6 to 18/30 kV
Conductor Electrolytic annealed copper, class 2 according to EN 60228 and IEC 60228
Standards IEC 60502-2, Repsol ED-P-10.01-01
Applications Open Air. In conduit. Underground.
Visits 1

Typical applications

Use-case guidance to understand where this product fits best.

X-VOLT® RHVhMVh 3x Cu +H1

Open Air. In conduit. Underground.

Reference application: Open Air. In conduit. Underground..

X-VOLT® RHVhMVh 3x Cu +H1

Medium Voltage Cables

Reference application: Medium Voltage Cables.

X-VOLT® RHVhMVh 3x Cu +H1

Medium Voltage Cables

Reference application: Medium Voltage Cables.

Why choose this cable

Service and manufacturing advantages that support the product decision.

Quality

Quality

Stable manufacturing and dependable delivery quality.

Engineering

Engineering

Practical cable solutions for project-specific use cases.

Value

Value

Balanced cost and product performance for long-term projects.

Support

Support

Fast response before delivery and after project deployment.

Product FAQs

Use these quick answers to help technical and commercial teams align faster.

Confirm voltage, conductor construction, installation conditions, required standards and cable sizing for the specific project.

Questions? We help you select the right cable.
Technical support

Questions? We help you select the right cable.

Request a quote

Related products

Previous: X-VOLT® RHZ1 AL OL/2OL Next: 没有了!