Henan Donglian Cable Co., Ltd.
LSZH Cables
Cables

LSZH Cables

Reference product range for lszh cables, organized for technical comparison and project enquiries.

LSZH Cables

TOXFREE® LSZH RZ1FZ1-K

Reference specification for RZ1FZ1-K in the LSZH Cables range. Confirm final construction, standards and sizing for the actual project before ordering.

Open Air. Buried. In conduit.

Category LSZH Cables
Brand TOXFREE® (reference)
Voltage 0.6/1 kV
Conductor Electrolytic annealed copper, class 5 (flexible) according to EN 60228 and IEC 60228
Standards IEC 60502-1, UNE 21123-4
Applications Open Air. Buried. In conduit.
Updated 2026-07-28

Technical overview

Key product information for comparison, engineering review and quotation preparation.

Product description

Reference specification for RZ1FZ1-K in the LSZH Cables range. Confirm final construction, standards and sizing for the actual project before ordering.

MaterialCopper, class 5 (flexible)
ConductorElectrolytic annealed copper, class 5 (flexible) according to EN 60228 and IEC 60228
InsulationCross-linked polyethylene type XLPE according to IEC 60502-1
Separation Sheath / BeddingLow smoke halogen free polyolefin
ArmourDouble steel or aluminium tape armour. Aluminium armour is used in single-core cables to avoid parasite currents that may overheat the cable
Outer SheathLow smoke halogen free polyolefin. Green colour
Rated Voltage0.6/1 kV
Maximum Conductor Temperature90 °C
Maximum Short-Circuit Temperature250 (max. 5 s) °C
Minimum Service Temperature-40 (fixed and protected installations) °C
Flame Non-PropagationFlame non-propagation according to EN 60332-1 / IEC 60332-1
Fire Non-PropagationFire non-propagation according to EN 60332-3 / IEC 60332-3 and EN 50399
CPR ClassificationCca-s1b, d1, a1 according to EN 50575
Halogen FreeHalogen free according to EN 60754-1 / IEC 60754-1
Low Corrosive Gases EmissionLow corrosive gases emission according to UNE-EN 60754-2 / IEC 60754-2
Low Smoke EmissionLow smoke emission according to EN 61034 / IEC 61034
Light Transmittance> 60%
Minimum Bending Radius10x cable diameter (during installation)
Impact ResistanceAG4 High severity
Rodent ProofRodent proof
Chemical & Oil ResistanceAcceptable
UV ResistanceUV Resistant according to EN 50618
Water ResistanceAD5 Jets
Installation ConditionsOpen Air. Buried. In conduit.
Standards (According To)IEC 60502-1, UNE 21123-4
Standards and ApprovalsRoHS, CE
Typical ApplicationsHigh-occupancy buildings, Industrial facilities, Power distribution

Reference source: Top Cable public product page. This local entry is a technical reference and does not imply manufacturing ownership of the referenced trademark.

Key characteristics

Electrical performance 0.6/1 kV
Conductor Electrolytic annealed copper, class 5 (flexible) according to EN 60228 and IEC 60228
Standards IEC 60502-1, UNE 21123-4
Applications Open Air. Buried. In conduit.
Visits 1

Typical applications

Use-case guidance to understand where this product fits best.

TOXFREE® LSZH RZ1FZ1-K

Open Air. Buried. In conduit.

Reference application: Open Air. Buried. In conduit..

TOXFREE® LSZH RZ1FZ1-K

LSZH Cables

Reference application: LSZH Cables.

TOXFREE® LSZH RZ1FZ1-K

LSZH Cables

Reference application: LSZH Cables.

Why choose this cable

Service and manufacturing advantages that support the product decision.

Quality

Quality

Stable manufacturing and dependable delivery quality.

Engineering

Engineering

Practical cable solutions for project-specific use cases.

Value

Value

Balanced cost and product performance for long-term projects.

Support

Support

Fast response before delivery and after project deployment.

Product FAQs

Use these quick answers to help technical and commercial teams align faster.

Confirm voltage, conductor construction, installation conditions, required standards and cable sizing for the specific project.

Questions? We help you select the right cable.
Technical support

Questions? We help you select the right cable.

Request a quote

Related products