Reference product range for high temperature cables, organized for technical comparison and project enquiries.
Fixed installations
Key product information for comparison, engineering review and quotation preparation.
Reference specification for SIWO XTREM in the High Temperature Cables range. Confirm final construction, standards and sizing for the actual project before ordering.
| Material | Tinned copper, class 5 (flexible) |
|---|---|
| Conductor | Tinned copper, class 5 (flexible) according to EN 60228 and IEC 60228 |
| Insulation | Silicone rubber according to IEC 60502-1 |
| Outer Sheath | Protective synthetic yarn braid, PUR varnished. Yellow colour (1.1 kV), Red colour (3.3 kV) |
| Rated Voltage | 1.1 kV and 3.3 kV |
| Maximum Conductor Temperature | 180 °C |
| Flame Non-Propagation | Flame non-propagation according to EN 60332-1 / IEC 60332-1 |
| Fire Non-Propagation | Fire non-propagation according to EN 60332-3-24 / IEC 60332-3-24 and EN 50399 |
| Fire Resistant | Fire resistant (PH120) minimum 120 minutes at 840°C according to IEC 60331-2 / EN 50200 (cable diameter ≤ 20 mm) and IEC 60331-1 / EN 50362 (cable diameter > 20 mm) |
| Halogen Free | Halogen free according to EN 60754-1 / IEC 60754-1 |
| Low Corrosive Gases Emission | Low corrosive gases emission according to EN 60754-2 / IEC 60754-2 |
| Low Smoke Emission | Low smoke emission according to UNE-EN 61034 / IEC 61034 |
| Light Transmittance | > 60% |
| Minimum Bending Radius | 5x cable diameter |
| Chemical & Oil Resistance | Excellent. Grease & mineral oils resistance: Excellent |
| Installation Conditions | Fixed installations |
| Standards (According To) | IEC 60502-1 |
| Standards and Approvals | RoHS, CE |
| Typical Applications | Wind converters, Transformers, Solar power inverters, Drives |
Reference source: Top Cable public product page. This local entry is a technical reference and does not imply manufacturing ownership of the referenced trademark.
Use-case guidance to understand where this product fits best.
Reference application: Fixed installations.
Reference application: High Temperature Cables.
Reference application: High Temperature Cables.
Service and manufacturing advantages that support the product decision.
Stable manufacturing and dependable delivery quality.
Practical cable solutions for project-specific use cases.
Balanced cost and product performance for long-term projects.
Fast response before delivery and after project deployment.
Use these quick answers to help technical and commercial teams align faster.
Confirm voltage, conductor construction, installation conditions, required standards and cable sizing for the specific project.
Where the source provides a public datasheet, use the download button and verify that it is the current revision.
Send the reference model and project requirements to the sales team for an equivalent-product review and quotation.
Reference specification for SIWO XTREM in the High Temperature Cables range. Confirm final construction, standards and sizing for the actual project before ordering.
Reference specification for SZ-K in the High Temperature Cables range. Confirm final construction, standards and sizing for the actual project before ordering.