Reference product range for fire resistant cables, organized for technical comparison and project enquiries.
Open Air, In conduit, Fixed installations
Key product information for comparison, engineering review and quotation preparation.
Reference specification for Z1OZ1-K (AS+) in the Fire Resistant Cables range. Confirm final construction, standards and sizing for the actual project before ordering.
| Material | Copper, class 5 (flexible) |
|---|---|
| Conductor | Electrolytic annealed copper, class 5 (flexible) according to EN 60228 and IEC 60228 |
| Insulation | Mica tape + Polyolefin LSZH |
| Screen | Aluminium-polyester tape 100% coverage + drain wire |
| Outer Sheath | Polyolefin LSZH. Red colour |
| Rated Voltage | 300/500 V |
| Maximum Conductor Temperature | 70 °C |
| Maximum Short-Circuit Temperature | 160 (max. 5 s) °C |
| Minimum Service Temperature | -40 (fixed and protected installations) °C |
| Fire Resistance | PH120 minimum 120 minutes at 840°C according to IEC 60331-2 and EN 50200 |
| Flame Non-Propagation | Flame non-propagation according to EN 60332-1 and IEC 60332-1 |
| Fire Non-Propagation | Fire non-propagation according to EN 50399 |
| CPR Classification | Cca-s1a,d1,a1 according to EN 50575 |
| Halogen Free | Halogen free according to IEC 60754-1 |
| Low Corrosive Gases Emission | Low corrosive gases emission according to EN 60754-2 and IEC 60754-2 |
| Low Smoke Emission | Low smoke emission according to EN 61034 and IEC 61034 |
| Light Transmittance | > 80% |
| Minimum Bending Radius | 10x cable diameter |
| Chemical & Oil Resistance | Acceptable |
| Water Resistance | AD3 Sprays |
| Installation Conditions | Open Air, In conduit, Fixed installations |
| Standards (According To) | UNE 211025 |
| Standards and Approvals | CE, RoHS |
| Typical Applications | Emergency circuits, Fire Detection and Alarm systems, High-occupancy buildings |
Reference source: Top Cable public product page. This local entry is a technical reference and does not imply manufacturing ownership of the referenced trademark.
Use-case guidance to understand where this product fits best.
Reference application: Open Air.
Reference application: In conduit.
Reference application: Fixed installations.
Service and manufacturing advantages that support the product decision.
Stable manufacturing and dependable delivery quality.
Practical cable solutions for project-specific use cases.
Balanced cost and product performance for long-term projects.
Fast response before delivery and after project deployment.
Use these quick answers to help technical and commercial teams align faster.
Confirm voltage, conductor construction, installation conditions, required standards and cable sizing for the specific project.
Where the source provides a public datasheet, use the download button and verify that it is the current revision.
Send the reference model and project requirements to the sales team for an equivalent-product review and quotation.
Reference specification for RZ1-K (AS+) FR2 in the Fire Resistant Cables range. Confirm final construction, standards and sizing for the actual project before ordering.
Reference specification for ROZ1-K (AS+) in the Fire Resistant Cables range. Confirm final construction, standards and sizing for the actual project before ordering.
Reference specification for RZ1C4Z1-K (AS+) in the Fire Resistant Cables range. Confirm final construction, standards and sizing for the actual project before ordering.